Digital Signal Processing MCQs | Digital Signal Processing Multiple Choice Questions and Answers

(1) The interface between an analog signal and a digital processor is
[A] A/D converter
[B] D/A converter
[C] Modulator
[D] Demodulator
Answer: A/D converter
(2) Roll-off factor is
[A] The performance of the filter or device
[B] Aliasing effect
[C] The bandwidth occupied beyond the Nyquist Bandwidth of the filter
[D] None of the above
Answer: The bandwidth occupied beyond the Nyquist Bandwidth of the filter

DOWNLOAD CURRENT AFFAIRS PDF FROM APP

Article and Schedule Quiz Start Test!
(3) DTFT is the representation of
[A] Aperiodic Discrete time signals
[B] Aperiodic continuous signals
[C] Periodic Discrete time signals
[D] Periodic continuous signals
Answer: Aperiodic Discrete time signals
(4) Frequency selectivity characteristics of DFT refers to
[A] Ability to convert into discrete signal
[B] Ability to translate into frequency domain
[C] Ability to resolve different frequency components from input signal
[D] None of the above
Answer: Ability to resolve different frequency components from input signal
(5) The Cooley–Tukey algorithm of FFT is a
[A] Split and combine algorithm
[B] Split and rule algorithm
[C] Divide and rule algorithm
[D] Divide and conquer algorithm
Answer: Divide and conquer algorithm
(6) DIT algorithm divides the sequence into
[A] Even and odd samples
[B] Upper higher and lower spectrum
[C] Small and large samples
[D] Positive and negative values
Answer: Even and odd samples
(7) In DSP processors, which among the following maintains the track of addresses of input data as well as the coefficients stored in data and program memories?
[A] Program sequences
[B] Barrel Shifter
[C] Data Address Generators (DAGs)
[D] MAC
Answer: Data Address Generators (DAGs)
(8) Decimation is a process in which the sampling rate is __________.
[A] Reduced
[B] Unpredictable
[C] Stable
[D] Enhanced
Answer: Reduced
(9) In tapped delay line filter, the tapped line is also known as ________
[A] Pick-off node
[B] Pick-on node
[C] Pick-up node
[D] Pick-down node
Answer: Pick-off node
(10) Anti-imaging filter with cut-off frequency ωc = π/ I is specifically used _______ upsampling process for the removal of unwanted images.
[A] After
[B] At the time of
[C] Before
[D] All of the above
Answer: After
(11) Which units are generally involved in Multiply and Accumulate (MAC)?
[A] Accumulator
[B] Adder
[C] Multiplier
[D] All of the above
Answer: All of the above
(12) How is the sensitivity of filter coefficient quantization for FIR filters?
[A] Unpredictable
[B] High
[C] Low
[D] None of these
Answer: Low
(13) Which among the following represent/s the characteristic/s of an ideal filter?
[A] Linear Phase Response
[B] Zero gain in stop band
[C] Constant gain in passband
[D] All of the above
Answer: All of the above
(14) FIR filters ________

A. are non-recursive

B. do not adopt any feedback

C. are recursive

D. use feedback

[A] A & B
[B] A & D
[C] C & D
[D] B & C
Answer: A & B
(15) The speech signal is obtained after
[A] Digital to analog conversion
[B] Analog to digital conversion
[C] Quantization
[D] Modulation
Answer: Digital to analog conversion
(16) Telegraph signals are examples of
[A] Pulse train
[B] Impulse signals
[C] Analog signals
[D] Digital signals
Answer: Digital signals
(17) The Nyquist theorem for sampling

1) Relates the conditions in time domain and frequency domain

2) Helps in quantization

3) Limits the bandwidth requirement

4) Gives the spectrum of the signal

[A] 1, 2 and 3 are correct
[B] 1 and 2 are correct
[C] 1 and 3 are correct
[D] All the four are correct
Answer: 1 and 3 are correct
(18) The computational procedure for Decimation in frequency algorithm takes
[A] 2Log2 N stages
[B] Log2 N2 stages
[C] Log2 N stages
[D] None of the above
Answer: Log2 N stages
(19) The s plane and z plane are related as
[A] z = esT/2
[B] z = 2esT
[C] z = e2sT
[D] z = esT
Answer: z = esT
(20) The similarity between the Fourier transform and the z transform is that
[A] Both convert discrete time domain to frequency spectrum domain
[B] Both convert digital signal to analog signal
[C] Both convert analog signal to digital signal
[D] none of the above
Answer: Both convert discrete time domain to frequency spectrum domain

Take Mock Tests

Missiles Mock Test Start Test!
SSC MTS Mock Test Start Test
IBPS CLERK MOCK TEST Start Test
SSC MTS 2022 JULY 26 Shift 1 (ENGLISH) Start Test!
SSC GD Previous Year Paper 2021 Nov 17 Shift - I (Hindi) Start Test!
SSC CGL Tier - 1 PYP 2022 April 21 Shift- 1 (ENGLISH) Start Test!
MPSC PAPER I MOCK TEST 1 (ENGLISH) Start Test!
IB Security Assistant Mock test 1 (english) Start Test!
UP POLICE CONSTABLE MOCK TEST 1 Start Test!
DELHI POLICE CONSTABLE MOCK TEST 1 (HINDI) Start Test!