JOIN ADRE 2.0 Telegram Group

Cables MCQs | Cables Multiple Choice Questions and Answers

Questions
1 The insulating material for a cable should have
A low cost
B high dielectric strength
C high mechanical strength
D all of the above

Answer: all of the above
2 Empire tape is
A varnished cambric
B vulcanised rubber
C impregnated paper
D none of the above

Answer: varnished cambric
Advertisement
Article and Schedule Quiz Start Test!

DOWNLOAD CURRENT AFFAIRS PDF FROM APP

3 The insulating material for cables should
A be acid proof
B be non-inflammable
C be non-hygroscopic
D have all above properties

Answer: have all above properties
4 In a cable immediately above metallic sheath _____ is provided.
A earthing connection
B bedding
C armouring
D none of the above

Answer: bedding
5 In case of three core flexible cable the colour of the neutral is
A blue
B black
C brown
D none of the above

Answer: blue
6 cables are used for 132 kV lines.
A High tension
B Super tension
C Extra high tension
D Extra super voltage

Answer: Extra super voltage
7 The minimum dielectric stress in a cable is at
A armour
B bedding
C conductor surface
D lead sheath

Answer: lead sheath
8 Dielectric strength of rubber is around
A 5 kV/mm
B 15 kV/mm
C 30 kV/mm
D 200 kV/mm

Answer: 30 kV/mm
9 Low tension cables are generally used up to
A 200 V
B 500 V
C 1000 V
D None of the Above

Answer: 1000 V
10 The surge resistance of cable is
A 5 ohms
B 20 ohms
C 50 ohms
D 100 ohms

Answer: 50 ohms
11 PVC stands for
A polyvinyl chloride
B post varnish conductor
C pressed and varnished cloth
D positive voltage conductor

Answer: polyvinyl chloride
12 In the cables, the location of fault is usually found out by comparing
A the resistance of the conductor
B the inductance of conductors
C the capacitances of insulated conductors
D all above parameters

Answer: the capacitances of insulated conductors
13 In capacitance grading of cables we use a ______ dielectric.
A composite
B porous
C homogeneous
D hygroscopic

Answer: composite
14 Pressure cables are generally not used beyond
A 11 kV
B 33 kV
C 66 kV
D 132 kV

Answer: 66 kV
15 The relative permittivity of rubber is
A between 2 and 3
B between 5 and 6
C between 8 and 10
D between 12 and 14

Answer: between 2 and 3
16 Solid type cables are considered unreliable beyond 66 kV because
A insulation may melt due to higher temperature
B skin effect dominates on the conductor
C of corona loss between conductor and sheath material
D there is a danger of breakdown of insulation due to the presence of voids

Answer: there is a danger of breakdown of insulation due to the presence of voids
17 If the length of a cable is doubled, its capacitance
A becomes one-fourth
B becomes one-half
C becomes double
D remains unchanged

Answer: becomes double
18 In cables the charging current
A lags the voltage by 90°
B leads the voltage by 90°
C lags the voltage by 180°
D leads the voltage by 180°

Answer: leads the voltage by 90°
19 If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be
A 5 kV/mm
B 10 kV/mm
C 15 kV/mm
D 30 kV/mm

Answer: 10 kV/mm
20 The intersheaths in the cables are used to
A minimize the stress
B avoid the requirement of good insulation
C provide proper stress distribution
D none of the above

Answer: provide proper stress distribution

ADRE 2.0 FULL LENGTH MOCK TEST

Take Mock Tests

Missiles Mock Test Start Test!
SSC MTS Mock Test Start Test
IBPS CLERK MOCK TEST Start Test
SSC MTS 2022 JULY 26 Shift 1 (ENGLISH) Start Test!
SSC GD Previous Year Paper 2021 Nov 17 Shift - I (Hindi) Start Test!
SSC CGL Tier - 1 PYP 2022 April 21 Shift- 1 (ENGLISH) Start Test!
MPSC PAPER I MOCK TEST 1 (ENGLISH) Start Test!
IB Security Assistant Mock test 1 (english) Start Test!
UP POLICE CONSTABLE MOCK TEST 1 Start Test!
DELHI POLICE CONSTABLE MOCK TEST 1 (HINDI) Start Test!
Advertisement
Assam Direct Recruitment Test Series