Geotechnical Engineering MCQs | Geotechnical Engineering Multiple Choice Questions and Answers
Questions
1
A fully saturated soil is said to be
Answer: two phase system with soil and water
2
A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is
Answer: 20.0 kN/m3
⭐ Make GKSeries Your Preferred Source on Google
Add GKSeries as Preferred Source
3
Select the correct statement.
Answer: Unit weight of soil decreases due to submergence in water
4
If the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is
Answer: equal to specific gravity of soil
5
Which of the following methods is most accurate for the determination of the water content of soil ?
Answer: oven drying method
6
In hydrometer analysis for a soil mass
Answer: meniscus correction is additive and dispersing agent correction is subtractive
7
Which of the following is a measure of particle size range ?
Answer: uniformity coefficient
9
Toughness index is defined as the ratio of
Answer: plasticity index to flow index
10
The admixture of coarser particles like sand or silt to clay causes
Answer: decrease in both liquid limit and plasticity index
11
Select the correct statement.
Answer: A uniform soil has less strength and stability than a non-uniform soil
12
At liquid limit, all soils possess
Answer: same shear strength of small magnitude
13
If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is
softer than the standard hard rubber, then
Answer: the liquid limit of soil always increases
14
According to IS classification, the range of silt size particles is
Answer: 0.075 mm to 0.002 mm
15
Dispersed type of soil structure is an arrangement comprising particles having
Answer: face to face or parallel orientation
16
Rise of water table above the ground surface causes
Answer: equal increase in pore water pressure and total stress
17
Select the correct statement.
Answer: The greater the unit weight, the greater is permeability
18
Effective stress on soil
Answer: decreases both voids ratio and permeability
19
Which of the following methods is more suitable for the determination of permeability of clayey soil ?
Answer: falling head method
20
Coefficient of permeability of soil
Answer: increases with the increase in temperature