Soil Mechanics and Foundation Engineering Quiz | Soil Mechanics and Foundation Engineering Objective Type Questions and Answers
Questions
21
At liquid limit, all soils possess
Answer: same shear strength of small magnitude
⭐ Make GKSeries Your Preferred Source on Google
Add GKSeries as Preferred Source
23
The water content of soil, which represents the boundary between plastic state and liquid state, is known as
Answer: liquid limit
24
Select the correct statement.
Answer: A uniform soil has less strength and stability than a non-uniform soil.
25
The admixture of coarser particles like sand or silt to clay causes
Answer: decrease in both liquid limit and plasticity index
27
Toughness index is defined as the ratio of
Answer: plasticity index to flow index
28
When the plastic limit of a soil is greater than the liquid limit, then the plasticity index is reported as
Answer: zero
29
If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in
Answer: plastic state
30
According to Atterberg, the soil is said to be of medium plasticity if the plasticity index PI is
Answer: 7 < PI < 17
33
Which of the following is a measure of particle size range ?
Answer: uniformity coefficient
34
The hydrometer method of sedimentation analysis differs from the pipette analysis mainly in
Answer: the method of taking observations
35
In hydrometer analysis for a soil mass
Answer: meniscus correction is additive and dispersing agent correction is subtractive
36
Stoke’s law is valid only if the size of particle is
Answer: between 0.2 mm and 0.0002 mm
37
A pycnometer is used to determine
Answer: water content and specific gravity
38
For proper field control, which of the following methods is best suited for quick determination of water content of a soil mass ?
Answer: calcium carbide method
39
If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is softer than the standard hard rubber, then
Answer: the liquid limit of soil always increases
40
According to IS classification, the range of silt size particles is
Answer: 0.075 mm to 0.002 mm